By John Morris · September 17, 2026
The Bosch 1617 family appears on several router-lift manufacturers' compatibility lists. That gives owners useful options, but “fits Bosch 1617” describes a motor connection. It does not say that the lift drops into a Bosch-branded router table.
Compare Bosch 1617EVS Router and Under-Table Base Bundle
As an Amazon Associate I earn from qualifying purchases. About our links.
Bosch 1617EVS Router and Under-Table Base Bundle
This bundle pairs the 1617EVS router with the RA1165 under-table base. It offers a router-and-base route to table mounting that should be distinguished from a separate lift carriage.
Check on AmazonDocumented starting points
| Lift | Manufacturer's named Bosch entry |
|---|---|
| JessEm Mast-R-Lift II | 1617 and 1618 |
| JessEm Rout-R-Lift 3.5XT | 1617 and 1618 |
| INCRA standard imperial Mast-R-Lift II | 1617EVS and 1618 |
| O'SKOOL RTS07 | 1617 and 1618 |
| SpeTool P01002 | 1617EVS and 1617EVSPK |
These entries reflect the wording on the linked manufacturer pages. They are not permission to omit a suffix or substitute a different Bosch motor. The SpeTool kit designation also requires identifying the actual motor included in that package.
Choose around the table you already own
If your motor is supported by several options, the tabletop can narrow the choice quickly. The standard INCRA lift has a 9¼ × 11¾-inch plate and explicitly does not fit Rockler or Bench Dog tables. A separate Rockler-exclusive version has a narrower plate. A compatible motor therefore does not make the standard version interchangeable with the exclusive one.
Owners of a Bosch RA1181 should read the RA1181-specific guide instead of assuming any motor-compatible lift will fit that table. An existing tabletop is a component with its own geometry, not just a stand for the motor.
Think about moving the motor between jobs
If you regularly use the same router handheld, consider how often you will remove it from the lift and reinstall its base. Check the lift's motor-release procedure and the access available inside your cabinet. A setup that is convenient for a dedicated motor may be awkward when changed twice during every project.
The dedicated motor versus kit decision can help assess that workflow without assuming a second router is necessary.
Confirm the purchased configuration
Before ordering, retain the exact lift version, the router label and the mounting instructions together. Ask about any required adapter or clamp setting rather than relying on a photograph of an apparently similar motor. Check that speed and power controls remain accessible after installation.
For the broader sequence, use motor, plate and table compatibility. The important result is a documented combination that works in your workshop, not simply the largest list of brands on a product page.
Consider how you prefer to adjust height, too. The RTS07 uses motorized control, whereas the comparison should not assume every listed option has the same adjustment mechanism. Choose that feature after fit is confirmed, rather than using it to excuse an unresolved mounting question.
Explore JessEm Rout-R-Lift 3.5XT
As an Amazon Associate I earn from qualifying purchases. About our links.
JessEm Rout-R-Lift 3.5XT
The 3.5XT targets the 3-1/2-inch motor class rather than every router in the shop. It is a focused option for buyers who have already identified their removable motor.
Check on Amazon