Router LiftGET YOUR SETUP DIALED IN.SHOP ALL
Filter the catalog, compare the exact version and open the current offer when you are ready.
43 products
As an Amazon Associate I earn from qualifying purchases. About our links.
SpeTool
A manual lift package pairing a 9-1/4 by 11-3/4-inch plate with three magnetic insert rings. The ring system makes this worth comparing when frequent opening changes are part of your workflow.
Check on Amazon
JessEm
The 3.5XT targets the 3-1/2-inch motor class rather than every router in the shop. It is a focused option for buyers who have already identified their removable motor.
Check on Amazon
O'SKOOL
O'SKOOL's RTS05 is an aluminum-plate lift listed for 3-1/2-inch router motors. Its fit claim concerns the motor, so the table opening still needs a separate check.
Check on Amazon
Kreg
The PRS5000 offers a documented route for matching a lift to an existing router through Kreg's compatibility chart. Start with that chart before choosing a motor or planning the table opening.
Check on Amazon
O'SKOOL
This O'SKOOL listing specifically names Bosch RA1181 and RA1171 tables. That table-specific version should not be confused with the standard O'SKOOL plate sold for other openings.
Check on Amazon
JessEm
A Mast-R-Lift II 02120 bundle with a ten-piece insert ring kit and caddy. The extra rings may reduce separate accessory shopping, provided the supplied kit matches your intended cutters.
Check on Amazon
MUWOOD
MUWOOD offers this router-table lift as a plate-and-adjustment assembly. The listing title leaves the motor range and plate measurements unstated, making those the first details to obtain.
Check on Amazon
O'SKOOL
This O'SKOOL configuration is listed for 4.2-inch router motors. It serves a different motor class from the brand's 3-1/2-inch lifts and needs its own fit check.
Check on Amazon
JessEm
The 02121 version carries an 8-1/4 by 11-3/4-inch plate. That narrower width is a meaningful distinction from the 02120 package when replacing an existing table insert.
Check on Amazon
Woodpeckers
Quicklift combines a rapid height-change feature with crank-operated fine adjustment. This particular listing specifies the 4.2-inch motor version, which matters more than the shared Quicklift name.
Check on Amazon
INCRA
The Mast-R-Lift-II-R is the Rockler-table version of INCRA's lift. Buyers comparing INCRA listings should identify this suffix before assuming the standard plate will fit.
Check on Amazon
Rockler
A Rockler lift kit with a listed 8-1/4 by 11-3/4-inch aluminum plate. It is a candidate for narrower table openings, subject to the remaining geometry and motor checks.
Check on Amazon
O'SKOOL
RTS07 replaces manual cranking with powered height positioning and includes five insert rings. The listing pairs a 9-1/4 by 11-3/4-inch plate with the 3-1/2-inch motor class.
Check on Amazon
O'SKOOL
The RTS023 combines digital lift controls with a version intended for Bosch RA1181 and RA1171 tables. It is a separate configuration from the standard-plate RTS07.
Check on Amazon
O'SKOOL
This bundle adds an automatic vacuum switch to an O'SKOOL lift for 3-1/2-inch motors. It is useful to compare as a package when dust-control switching is also missing from the setup.
Check on Amazon
O'SKOOL
A 27 by 16-inch cast-iron extension wing intended to bring routing space alongside an existing station. Its overall size is only the starting point for planning support and attachment.
Check on Amazon
O'SKOOL
This package combines an O'SKOOL lift for 3-1/2-inch motors with a steel stand and levelers. It is aimed at a broader station build, rather than a simple insert replacement.
Check on Amazon
Woodpeckers
An eight-piece molded ring set using Woodpeckers' twist-lock format. The locking interface makes model compatibility more important than matching an approximate ring diameter.
Check on Amazon
SawStop
The RT-PIR set provides four phenolic inserts for compatible SawStop router plates. It is an accessory purchase, so it does not replace the plate or the lift mechanism.
Check on Amazon
3DEXL
A third-party ring set with a caddy, advertised for the JessEm Rout-R-Lift II 02310 plate. The maker is 3DEXL; the JessEm name describes the intended host product.
Check on Amazon
3DEXL
This full-set listing targets the JessEm/Rockler Rout-R-Lift FX plate. It differs from the separately listed guide-only option and from rings intended for Rout-R-Lift II plates.
Check on Amazon
SawStop
SawStop's RT-LFT uses a four-post lift arrangement with a locking feature. Its suitability depends on the router motor and table opening, even when the surrounding equipment is SawStop-branded.
Check on Amazon
SawStop
The RT-DCB is an under-table dust box for a router-lift installation. It addresses collection below the tabletop rather than substituting for pickup at the fence.
Check on Amazon
Rockler
This Pro Lift listing identifies the large-plate configuration. It should be compared with other Pro Lift versions using the actual plate measurements instead of the family name alone.
Check on Amazon
SawStop
The RT-FLS is a flip stop for a compatible router fence. It belongs to the fence setup and does not change the lift's adjustment travel or motor compatibility.
Check on Amazon
Bosch
This bundle pairs the 1617EVS router with the RA1165 under-table base. It offers a router-and-base route to table mounting that should be distinguished from a separate lift carriage.
Check on Amazon
Bosch
The RA1165 provides a Bosch under-table mounting base with an above-table hex key. It is listed for Bosch 1617 and 1618 series routers, not as a universal lift.
Check on Amazon
Bosch
This Bosch replacement collet chuck is listed for router models 1613 and 1617. Its quarter-inch size describes bit shank accommodation, not the motor diameter a lift clamps.
Check on Amazon
Bosch
A half-inch Bosch collet chuck listed for the 1613, 1617 and 1618 series. It is relevant when restoring a compatible router's bit-holding equipment before table use.
Check on Amazon
Bosch
This package combines the 1617EVS router with Bosch's RA1181 benchtop table. It can establish the router-and-table part of a setup, but a separate lift is not named in the bundle title.
Check on Amazon
SpeTool
SpeTool's dust collector combines a clear acrylic top, LED lighting and a 2-1/2-inch outside-diameter port. The included drilling template does not by itself prove every lift can accept it.
Check on Amazon
Solinder
A manual compact lift listed for small trimming-machine motors in the 64–66 mm range. That size class is distinct from the full-size motors used by many conventional table lifts.
Check on Amazon
Rockler
Rockler's adjustable-bristle chute is intended to collect debris from dado routing at the table. Its placement and blast gate deserve a separate layout check from a cabinet dust box.
Check on Amazon
POWERTEC
The 70288 adds a 2-1/2-inch hose connection at a compatible router-table fence. It is a fence pickup component rather than an enclosure for the motor or lift.
Check on Amazon
Phefop
Phefop lists this compact lift with four-jaw clamping, a 64–66 mm motor range and 51 mm of lifting height. The stated travel is a planning dimension, not a promise of above-table bit-change access.
Check on Amazon
SpeTool
This SpeTool package pairs a router lift with the brand's table-lift dust hood. The listed 2.56–4.21-inch motor range still needs to be checked against the actual motor and supplied adapters.
Check on Amazon
Kreg
PRS4036 is a router-table insert plate for buyers retaining a direct-mounted router setup. A plate supports the router but does not add a separate lift mechanism.
Check on Amazon
Kreg
The PRS4038 is another Kreg insert-plate configuration and should be selected by its exact mounting specification. Similar appearance to PRS4036 is not enough to establish the same router fit.
Check on Amazon
KETIPED
A compact square insert plate for a small router-table project. This listing identifies the 055Red configuration, so dimensions and hole locations need checking for that exact version.
Check on Amazon
POWERTEC
POWERTEC's 71850 insert plate names several router brands in its listing. Brand-level wording should lead to a model and hole-pattern check rather than an assumption that every router fits.
Check on Amazon
KETIPED
This KETIPED package includes a 9.4 by 7.9 by 0.2-inch plate with a fence and miter guide. It suits a different footprint from common full-size lift plates.
Check on Amazon
Taytools
Taytools lists this plate at 9 by 12 inches and one-quarter inch thick. Those measurements make it worth checking separately from nominal 9-1/4 by 11-3/4-inch lift openings.
Check on Amazon
KETIPED
This KETIPED assembly bundles a lift for a listed 65 mm trimming motor with a plate, fence and miter guide. It is a compact system rather than a full-size lift substitute.
Check on Amazon