By John Morris · September 17, 2026
The O'SKOOL RTS07 has a documented list of supported 3½-inch router motors. That is a more useful answer than saying “O'SKOOL fits standard routers,” because other O'SKOOL versions and table-specific packages can use different arrangements. Read the model number on the selected offer before applying this list.
Compare O'SKOOL RTS05 Router Lift for 3-1/2-Inch Motors
As an Amazon Associate I earn from qualifying purchases. About our links.
O'SKOOL RTS05 Router Lift for 3-1/2-Inch Motors
O'SKOOL's RTS05 is an aluminum-plate lift listed for 3-1/2-inch router motors. Its fit claim concerns the motor, so the table opening still needs a separate check.
Check on AmazonNamed motors for the RTS07
O'SKOOL’s RTS07 product page lists Porter-Cable 690 and 890, Bosch 1617 and 1618, DeWalt DW610, DW616 and DW618, Craftsman 28190 and 28084, and Skil RT1322-00. The removable motor and the specified installation configuration matter; a kit name or family resemblance is not enough.
If your motor is absent, its status is unconfirmed here. That does not establish that it is incompatible, but it does mean you should get a model-specific answer before purchasing. Do not turn an approximate body measurement into approval for an unlisted router.
The table has its own fit requirements
The standard RTS07 plate is specified as 9¼ by 11¾ by ⅜ inches, with a ¾-inch corner radius. Those are plate measurements. They are not instructions to route an opening of exactly those dimensions without reference to the installation details.
Check the support ledge or approved leveling arrangement, retaining hardware and space below the plate. O'SKOOL describes adjustable cam wheels and leveling screws, but those features do not make every oversized or unsupported opening suitable. The plate-fit guide explains what must be measured.
Bosch motor fit does not mean Bosch table fit
A Bosch 1617 motor appearing in the RTS07 list says nothing by itself about a Bosch RA1181 tabletop. Some listings target a specific table separately. Match the actual lift variant to both pieces of equipment rather than treating a brand name in the title as a complete compatibility statement.
For that table, consult the RA1181 lift guide. Keep the table identifier and router identifier on separate lines in any question you send to a seller or manufacturer.
Automatic adjustment changes the planning
The RTS07 is described as a motorized lift. You must accommodate its controls and power requirements as well as the router’s own controls. Do not assume its height-adjustment controls serve as the router’s emergency stop or that powered lifting eliminates the need for clearance checks.
Before ordering, obtain the instructions for the exact electrical version being supplied and check that the required accessories are included. If you mainly want above-table hand adjustment, compare the workflow in our manual versus motorized lift guide. The benefit of automatic movement depends on your work; it cannot correct an unsuitable clamp or tabletop.
Explore O'SKOOL Router Lift for Bosch RA1181 and RA1171 Tables
As an Amazon Associate I earn from qualifying purchases. About our links.
O'SKOOL Router Lift for Bosch RA1181 and RA1171 Tables
This O'SKOOL listing specifically names Bosch RA1181 and RA1171 tables. That table-specific version should not be confused with the standard O'SKOOL plate sold for other openings.
Check on Amazon