INCRA vs Woodpeckers Router Lifts: Features and Table Fit

By John Morris · September 17, 2026

INCRA versus Woodpeckers is not always a clean split between competing brands. INCRA sells a Woodpeckers/INCRA QuickLift as well as the INCRA Mast-R-Lift II. A search for “Woodpeckers precision router lift” may also surface an older PRL V2. Put the full model names at the top of your comparison before assigning features to either side.

Compare INCRA Mast-R-Lift II for Rockler Tables

As an Amazon Associate I earn from qualifying purchases. About our links.

INCRA Mast-R-Lift II for Rockler Tables

The Mast-R-Lift-II-R is the Rockler-table version of INCRA's lift. Buyers comparing INCRA listings should identify this suffix before assuming the standard plate will fit.

Check on Amazon

Two documented INCRA options use different adjustment approaches

The standard imperial INCRA Mast-R-Lift II uses repositionable motor-clamping blocks and a 16-TPI lift screw. The Woodpeckers/INCRA QuickLift provides a separate quick-lifting tool for large height changes and a micro-adjust crank for fine setting. INCRA states 1/32 inch of fine travel per revolution for the QuickLift.

That creates a practical choice: do you want a coarse repositioning step separate from fine adjustment, or are ordinary crank movements acceptable for your work? Neither approach can be declared universally faster without considering the bit changes and height changes you make.

QuickLift versions are motor-specific

INCRA identifies QuickLift 350, 414 and 420 variants for different motor groups. Its page names Bosch 1617EVS within the 350 group, Milwaukee 5625-20 within the 414 group, and Porter-Cable 7518 within the 420 group. Buying the correct family but wrong variant does not solve compatibility.

The Mast-R-Lift II uses its own documented clamping arrangement and approved motor list. Refer to the motor-and-table compatibility sequence before treating either system as an upgrade path for a future router.

Plate size and ring system are separate decisions

The standard INCRA plate footprint is 9¼ by 11¾ inches. There is also a Rockler-size INCRA Mast-R-Lift II, which is narrower. Do not infer the dimensions of a secondhand lift from its red plate or INCRA name. The plate-size guide explains the measurements needed beyond width and length.

INCRA’s QuickLift uses MagnaLOCK reducing rings with their own leveling provision. If you already own rings, check their exact compatibility rather than assuming every ring from a related brand transfers. A collection of incompatible rings has no practical value in a price comparison.

Where a PRL V2 listing fits

A PRL V2 should be evaluated from its own identifier, manual and supplied parts. Do not copy the current QuickLift motor list into an older listing. Ask the seller which plate and motor version is included and whether the lifting tool and adjustment accessories are present.

For a used purchase, the decisive difference may be completeness and service support rather than a feature on a current product page. Use the used-lift checklist to establish what you are actually getting before comparing the asking price with a complete new package.

Explore Woodpeckers Quicklift for 4.2-Inch Motors